|
|
|
Shooting Tables Choose from five quality shooting tables ranging in size from 20" x 25" to 48" x 60". All shooting tables are constructed with oversized wingnut knobs, torque levers, and heavy 16 gauge square steel tubing with self locking hardware. All have adjustable leveling feet. Larger models have locking casters. Smaller models include Plexiglas™ and are fully assembles and ready to use. All ship UPS. *1/8" translucent white Plexiglas™ #2447 is recommended for all shooting tables.
Uses only 48" x 60" of floor space. Four knob easy breakdown. Accepts 4' x 8' Plexiglas™ (not included). Height is 85" maximum. Stabilizer bars hold Plexiglas™ flat. curved front for low camera angles. Locking back frame is adjustable flat to 90°. Seamless paper roll holder. Locking casters. Assembly required. #40010 - $559.95
Takes only 42" x 36" of floor space. Height is 64". Accepts 42' x 72" Plexiglas™ (not Included). Stabilizer bars hold Plexiglas™ flat. Light stand adapters on top rail for accessory booms, lights, etc. Seamless paper roll holder. Locking casters. Assembly required. #40310 - $459.95
Uses only 27" x 35" of floor space. height measures 32" in front and 52" in back. Includes 27" x 54" white Plexiglas™. Stabilizer bars hold Plexiglas™ flat. Four knob easy breakdown. Curved front allows low camera angles. Locking casters. #40500 - $469.95
Flex Lights™ Clamp on flexible lights. Uses medium base, fluorescent or incandescent lamps. Use with all shooting tables. 300 watt rated phenolic sockets. Eight foot cord. UL/CSA #40542 - $81.95
Light Mover™ Rail System Eliminate the light stand jungle and obtain more usable floor space. Factory pre-drilled rails and easy glide, 8 ball bearing, chrome/steel wheel trolleys provide the smoothest guide in the industry. Easy to install and can be mounted directly to ceilings of 8 foot or more. Drop ceiling tubes are available in 24" and custom lengths. The spring counter-balanced scissors (lifetime powder coated) and 2 section telescope lifts support lights and softboxes up to 10 pounds and extend to 72" and 50" respectively. Save 25% to 33% when you order System Packages!
Rail Systems:
#40620 - $548.95 - Sale Price $439.00
#40622 - $851.95 - Sale Price $682.00
#40630 - $1020.95 - Sale Price $868.00
#40632 - $1377.95 - Sale Price $1100.00
Two Light Systems Include:
Three Light Systems Include:
Light Mover™ Rail System Components:
Ceiling Flange Allows mounting lower than existing ceiling. #40638 - $49.95, 24", Set/2
Supports lights up to 10 lbs. Spring counter-balanced. Extends from 13" to 72". Includes single trolley with brake, 5/8" male adapter, and safety cable. #40642 - $395.95
Supports lights up to 10 lbs. Two sections extend from 24" to 50". Includes single trolley with brake, 5/8" male adapter, and safety cable. #40643 - $184.95
Double Trolley with Brake 16 wheel dual rotating carriage to join the floating rail to the fixed rail. #40644 - $113.95
Single Trolley with Brake 8 wheel carriage for mounting Scissor Lift Kit to floating rail. Includes safety cable and 5/8" stud. #40646 - $56.95
Cable Trolley Kit Suspends cables safely from rail system. #40648 - $29.95
Fixed Ceiling Rails Easily attaches to most ceilings with minor drilling. Includes rail joining plates and end stops. #40650 - $36.95, 4 foot #40652 - $53.95, 6 foot
Floating Rail Glides along the length of the fixed rail. #40654 - $191.95, 9' 10" #40655 - $105.95, 5 foot extension with joint plate
Joint Plate for extending Light Mover Floating Rails Includes screw. #40656 - $16.95
5/8" to 3/8" Adapter 6" adapter with 3/8" stud. Fits 5/8" female fittings. #40658 - $12.95
NEW!
Attaches to Light Mover™ Scissor and Telescope. Adjustable to any position, 1/4-20. #40659, 18" - $71.95 #40662, 24" - $89.95
18" Safety Cable 18" plastic coated wore cable with snap hook. #40666 - $12.95
9" x 13" lens shade stays firmly in any position. Height adjusts fro 4" to 16". Clamps or screws to any tripod, camera, or matte box. Includes 1/4"-20 and 3/8" base adapter to fit any system. Weighs only 10 ounces. #46042 - $66.95 #46132 - $10.95, Extension Segments, 10" x 1/2"
Fits male/female 3/8" and 5/8" light stands. 11" of flexible segments for placement of gobos, scrim rods, reflectors, flags, small lights and flash heads. #46070 - $40.95, with 1" clamp #46072 - $50.95, with "C" clamp #46060 - $40.95, with top 3/8" mounting stud. Fits male/female ¼"-20 tripod threads.
Perfect for table top photography of jewelry, small objects, etc. #46010 - $74.95
Flexible with 45° tilt and 360° rotation. Includes 100 lb. pull magnetic base and steel plate with mounting holes. Fits tripods, 3/8" and 5/8" lights stands. Perfect for placement of back lights, flash heads, gobos, reflectors, flags, etc. Adapters included. #46050 - $41.95, 5¾" length
For holding gels, gobos, flags and reflectors for special effects and lighting control. #46020 - $51.95, 12½" length
1" clamps, 12" length. #46030 - $42.95
Grip-It™ 1" x 12" Snap Segments Attaches to all 1" diameter segments of the Grip-It™ family when extra length is needed. #46130 - $19.95
Special metal alloy will bend, twist, and reshape any direction. 24" long. Holds flash, reflectors, gels and gobos. 3/8" male/female. #46110 - $34.95, 1" Clamp Flexrod™, supports 4 lbs. #46200 - $34.95, Light Stand Arm Flexrod™, supports 4 lbs. #46210 - $34.95, Light Stand Arm Flexrod™, supports 2 lbs.
Magnets include a "No Scratch Mylar Car Cap" base. Powerful magnetic base with ¼"-20 tripod, 3/8" and 5/8" stand adapters. Use to hold, lift, secure, and position hard-to-handle items. #46160 - $33.95, holds 100 lbs, 3¼" diameter #46170 - $45.95, holds 175 lbs, 5" diameter
Fits ¼"-20 male thread. Holds up to 4" x 3" foamcore™ sheet. #46080 - $16.45
Inexpensive, black with white reverse. 4 hi-key/low-key vignette effects flags. Produces fade-in/fade-out effects, soft edges, and vignettes. Fits all 4½" square holders and shades. #46120 - $9.95
Keeps cable and cords neat, organized, and safe. Strong self-gripping one piece hook/loop fastener material. Locks on cords or cables. Reusable thousands of times. Trims to any length. #46212 - $5.95, 1" x 12" Pkg/3 #46216 - $7.95, 1¾" x 24" Pkg/2, black #46232 - $7.95, 1¾" x 24" Pkg/2, red
1" wide strap keeps cables and cords where needed. Handles bundles from 2" to 6". Large 2½" "D" ring for hanging on light stands, knobs, hooks, nails, etc. Trim-able with scissors. 1¾" x 24". #46262 - $19.95, Pkg/4, 2 red, 2 black
Steel 3/8" stud, ¼"-20. Plate straps to stands, poles, tripods with "D" ring loop. Fits most accessories. Supports up to 8 lbs. Fits poles from 1" to 3" diameter. #46264 - $18.95
These indispensable holder feature double-ended, flexible stainless steel spring clips and/or black nylon "A" clamps. holds diffusers, gels, gobos, reflector cards in place. Bends, twists, stays put exactly here you want it. Patent pending. #46112 - $12.95, 6" dual clip #46113 - $39.95, 6" with clip/1" clamp, Pkg/4 #46114 - $16.95, 6" with clip/1" clamp #46116 - $17.95, 12" with clip/1" clamp #46118 - $20.95, 8" with 1" clamps #46119 - $13.95, 6" with ½" clamps
Unique double-ended, flexible, mounted metal clip. Excellent for barn doors, diffusers, gels, foam board. 1¾" wide jaws. Matte black finish. #46310 - $11.95, 6" sawtooth clips #46330 - $12.95, 8" sawtooth clips #46340 - $4.50, single sawtooth clip #46344 - $19.95, 12" arms triple clip
Zone System 18% Gray Cards Correct color or black and white exposures every time regardless of contrast, brightness or conditions. Accurate to within 1%. Includes instructions. 8" x 10". #22010 - $12.95, card stock, Pkg/2
Oversized aluminum, steel or brass. One Year Ltd Warranty. Made in U.S.A. #21200 - $4.60, ¼"-20 to 3/8" stud x ¾" long #21204 - $6.50, ¼"-20 to 3/8"-16 x 5/16" long, brass #21212 - $8.95, ¼"-20 female to 3/8" stud x 2" long #21202 - $4.60, 3/8"-16 to ½" stud x 7/8" long #21218 - $10.60, 3/8" female to 5/8" stud x 1½" long #21220 - $11.50, 3/8" female to 5/8" stud x 2" long #21214 - $10.60, 5/8" female to 3/8" stud x 1¼" long #21216 - $11.50, 5/8" female to 3/8" stud x 2" long #21244 - $20.95, 5/8" stud to 5/8" stud x 8" long with ¼"-20 and 3/8" holes #21194 - $17.25, 1 1/8" stud to 5/8" stud x 5" long
Adapter fits all 5/8" or smaller stands horizontally or vertically. Side hole allows adapter to slide and lock in any position. #21246 - $11.95, 3/8" #21248 - $11.90, ¼"
Replacement Knobs Industry standard knobs will fit most photographic equipment. #21228 - $3.65, 1½" four sided knob, ¼"-20 x ¾" long #21230 - $3.65, 2" diamond knob, ¼"-20 x 1" long #21232 - $3.65, 1" diamond knob, ¼"-20 x ½" long #21236 - $3.65, 1" diamond knob, ¼"-20 x ¾" long #21234 - $3.65, 7/8" round fluted knob, ¼"-20 x 2" long
Eliminated misfires and failures. Extends sync cord life. Repairs socket end of PC cords, including Metz, Wein, Vivitar, and Paramount type. Realigns and tightens center contact pin. Unique tapered hole assures a tight fit on camera contacts. #47010 - $19.95
Suspend-It™ Kit Non-reflective, ultra fine alloy wire suspends, floats and animates objects, props, products. Photographically invisible. Supports up to 4 pounds. Will not stretch. Can be super glued, clamped, pinned or taped. Each kit includes: one 20' roll each of 1, 2, and 3, mil wire, one bottle PhotoBond™ adhesive, two match activated hot glue sticks, two suspended ceiling clips, two alligator clips, twelve pressure sensitive hooks. #45010 - $39.95
#01608 - $10.95, 1" clamp
"A" clamps hold almost anything without damage. Tip swivels 135° to accommodate flat, uneven and round surfaces. Serrated edge to grip stands, booms and pipe securely. Heat resistant. #01620 - $5.95, 1" clamp, black nylon, adjustable tips #01600 - $2.75, ½" metal clamp with vinyl tips #01618 - $2.25, 3/4" clamp, black nylon, adjustable tips NEW #01602 - $4.00, 1" metal clamp with vinyl tips NEW #01604 - $5.50, 2" metal clamp with vinyl tips
|
Send mail to teresa@cpmdelta1.com
with questions or comments about this web site.
|
Unique system provides the helping hand you need. Segmented, one inch and
one-half inch diameter snap together fittings, special clamps and adapters allow
you to position and set props, lights, reflectors, gobos, gels, flags, and rods
at virtually any angle and position. Helps you tame the light stand jungle.
